Your Guide to Hozelock Titan Filter Pumps

 

Specifications

Model	Max Flow (lph)	Max Head (metres)	Flow @ 1m (lph)	Solids Handling Range	Waterfall Width @ 0.6m	Waterfall Width @ 1m	Hose Diameter
15000	15000	4.2	11000	0-10mm	1.23m	1.07m	20-40mm

 

Features

Versatile

Hozelock Titan pumps have been designed as solid handling pumps so are classed as filter pumps. However, they are also suitable pumps for powering waterfalls or watercourses where they can continuously pump high volumes of water and have a high resistance to clogging.

 

Easy to Maintain

The large, easy to use locks on the side of the Titan make it simple to remove the filter cage for cleaning and maintenance.

 

Reliable

The ridged design on the top of the pump helps to reduce clogging caused by leaves and other large solids.

 

Easy to Install

The detachable ball-joint on the pump outlet means you can easily position your hose along the bottom of your pond, even if the surface is uneven. A standard hose-tail is also included.

 

Wildlife Protection System

The intake holes at the bottom of the pump are designed to accept solids of up to 10mm (depending on model - see table above). The Titan also has a Wildlife Protection System which lets you close the intake slots down to a minimum of 2mm to protect tadpoles and baby fish.

 

To return to the Hozelock Titan main page, click here.

To go to the filter pumps section, click here.

If you have any questions or comments, please call our customer services team on 01904 698800